Telecom Behnke 20 Serie Instructions page 59

Manual Door intercom devices a / b Series 20 / 30 / 50
GB GB
Configuration and Set-up
Code Parameter
Extended configurations: Default setting: 0
900 0 = disabled
1 = enabled
The following configuration may only be adjusted with enabled extended
configurations.
Amplification microphone signal (without additional power supply):
912 Default setting: 0/0
0 = 0 dB
1 = 6 dB
2 = 12 dB
3 = 18 dB
Amplification microphone signal (with additional power supply): Default
922 setting: 0/0
0 = 0 dB
1 = 6 dB
2 = 12 dB
3 = 18 dB
Divergent configurations steps for universal devices
(20-0005 / 20-0006 / 20-0018 / 20-0048)
21 Telephone number for button 1
22 Telephone number for button 2 or MLM A (yellow connector)
23 Telephone number for button 3 or MLM B (blue connector)
24 Telephone number for button 4 or MLM C (red- connector)
25 Telephone number for button 5
: :
28 Telephone number for button 8
29 Telephone number for the button
Additional configurations steps, e.g. relay control, acoustic settings, additional electronics for
voice messages / real time clock etc. can be found in the more detailed technical manual
(www.behnke-online.de/handbuch-analog).
59
on the number keypad
Confirmation
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
:
#
#
www.behnke-online.com