Telecom Behnke 20 Serie Instructions page 53

Manual Door intercom devices a / b Series 20 / 30 / 50
GB GB
Configuration and Set-up
Code Parameter
Reset and return to default settings:
00 * * * *
Change the security code: Default setting: 0 0 0 0
01 new security code [beep] new security code
Configuration and Set-up: Default setting: 0
02 0 = settings can be changed both directly on the device or remotely
1 = settings can only be changed remotely
Answering a call: Default setting: 1
03 0 = manually by pressing a button
1 = automatically
2 = automatically with code entry (caller protection)
3 = automatically with manual confirmation (from V1.60 or later)
Input delay for direct call buttons: Default setting: 0
04 0 = none
1 = 1 second
:
9 = 9 seconds
Connection interval: Default setting: 3
05 0 = unlimited (i.e. limited to a connection time of approx. 8 hours)
1 = limited to 1 minute
:
9 = limited to 9 minute
06 Volume Default setting: 5
0 = very low volume
:
9 = very loud volume
53
Confirmation
#
#
#
#
#
#
#
#
#
#
:
#
#
#
:
#
#
:
#
www.behnke-online.com