Telecom Behnke 20 Serie Instructions page 58

Code Parameter
*8 x y waiting for call answer (x = voice message played while waiting
for call to be answered and y = voice message played after call
has been answered) (only sensible with corresponding add-on
module)
*9 x pointer to telephone number (x=1...9)
*9 0 x pointer to speed dial (x=00...99)
**x individual group call (x=1=...9=next telephone number)
**0 Hotline function
*# Flash function
**** Stop dialling
***0 Mute off
***1 Mute on
With version 1.34 or later:
*4**1 in case relay 1 is activated
*4**2 in case relay 2 is activated
*4*xy check a variable (condition) (x=0..9, y=0..9) x=y?
The condition is fulfilled if value x equals value y.
*5*x y define a variable (condition) (x=0..9, y=0..9) x=y?
defines the variable x to the value y
*5** x increment variable (x=0..9) x++
increments variable x (for x=9, the x++=0)
*6* 0 Disable timer
*6* x mm activate direct call button x (x=1..9) after mm (mm=00..99)
minutes
*74 Disable Relay 1 (only for operations mode 18)
*75 Enable Relay 1 (only for operations mode 18)
*76 Disable Relay 2 (only for operations mode 18)
*77 Enable Relay 2 (only for operations mode 18)
Speed dialling numbers: Specification: cf. text
300 Speed dialling
301 Speed dialling
:
399 Speed dialling
www.behnke-online.com
Manual Door intercom devices a / b Series 20 / 30 / 50
speed dialling number 00
speed dialling number 01
speed dialling number 99
Configuration and Set-up
Confirmation
#
#
:
#
GB
58