Ryobi RYi2200A Manuel D'utilisation page 11

All manuals and user guides at all-guides.com
SYMBOLS
FUEL CAP WARNING
Never remove fuel cap when unit is running. Shut off engine and allow the unit to
cool at least five minutes. Remove cap slowly to release any pressure built up in
the fuel system and to avoid the heat from the muffler igniting fuel vapors.
ENGINE LUBRICANT WARNING
You must add lubricant before first operating the generator. Always check the lubri-
cant level before each operation. The lubricant level should always register between
the hatched areas on the dipstick. The unit is equipped with a sensor which will au-
tomatically shut off the engine if the lubricant level falls below a safe limit.
GROUNDING WARNING
This generator does not include a ground rod or copper wire. Call a qualified elec-
trician for local grounding requirements.
HOT SURFACE WARNING
Do not touch the muffler or alumi-
num cylinder of the engine. They
are very HOT and will cause se-
vere burns. Don't put body parts
or any flammable or combustible
materials in the direct path of the
exhaust.
CLEARANCE WARNING
While operating and storing, keep at least 3 feet of clearance on all sides of this product, including overhead. Allow a mini-
mum of 30 minutes of "cool down" time before storage. Heat created by muffler and exhaust gases could be hot enough
to cause serious burns and/or ignite combustible objects.
SPARK ARRESTOR
Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.
7 — English