Endress+Hauser RIA141 Manuel De Mise En Service page 49

Operating the field indicator
6.2.2 Programming in the operating matrix
Fig. 12: Programming the RIA141
w Enter the operating matrix
x Menu (select with "+" or "-" key)
y Select the operating functions
z Enter parameters in the edit mode (enter/select data with "+" or "-" and accept with "E").
{ Go directly to the Home position.
– Beforehand, you are asked whether the data entered up to now should be saved.
| Exit the menus with "+/-". You are asked whether the data entered should be saved.
} Prompt to save data (select YES/NO with "+" or "-" key and confirm with "E").
The operating matrix can be found in Section 6.3.
49