Operating The Field Indicator; Display And Operating Elements; Configuration Via Operating Keys - Endress+Hauser RIA141 Manuel De Mise En Service

6

Operating the field indicator

6.1

Display and operating elements

6.1.1 Display
Fig. 10: LC display of the field indicator (illuminated, can be plugged in in stages of 90°)
6.1.2 Display symbols
1 Bargraph display
1a Indicator for measuring range undershoot
1b Indicator for measuring range overshoot
2 'Caution' indicator
3 Unit display K, °F, °C or %
4 Measured value display (digit height 20.5 mm
(0.8"))
5 Status and information display/configuration
6 Configuration blocked display
6.2

Configuration via operating keys

#
Warning!
The device must be configured outside the hazardous area.
Fig. 11: Operating keys of RIA141 ("-", "+", "E")
Operating the field indicator
In 10 % stages with indicators for measuring range overshoot/
undershoot.
This indicator flashes in the event of errors, warnings and limit
value overshoot/undershoot
Unit display for the measured value displayed
The measured value is displayed. In the event of a warning, the
display switches between the measured value and the code of
the warning. In the event of an error, the error code is
displayed instead of the measured value.
5-digit 7 segment display. The following are displayed: current,
editable unit (in operation), dialog text for configuration (text),
error number (displayed instead of the unit).
Configuration can be blocked by means of the software.
47