Nice Riva Instructions Et Avertissements Pour L'installation Et L'utilisation page 64

Range of the ECCO5... transmitters
Programmable functions
Self-programming functions
EC Declaration of Conformity
Declaration in accordance with the following Directives: 1999/5/EC (R&TTE), 2014/30/EU (EMC); 2006/42/EC (MD) Annex II, Part B
Note - The contents of this declaration correspond to that stated in the official document filed in the offices of Nice S.p.A. and, in particular, the latest version thereof available prior to the printing
of this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (TV) Italy.
Number: 581/RIVA
Manufacturer's name:
Address:
Person authorised to draw up
technical documentation:
Product type:
Model / Type:
Accessories:
The undersigned, Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above complies with the provisions
of the following directives:
• Model CLB201 conforms to Directive 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecom-
munications terminal equipment and the mutual recognition of their conformity, in accordance with the following harmonised standards
– Health and safety (Art. 3(1)(a)): EN 62479:2010
– Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+ A11:2009+A12:2011+A1:2010+A2:2013
– Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V1.9.2:2011, EN 301 489-3 V1.6.1:2013
– Radio spectrum (Art. 3(3)): EN 300 220-2 V2.4.1:2012
• Models RIVA200M and CLB201 conform to DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast), in accordance with the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
• Models RIVA200M and CLB201 conform to DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the har-
monisation of the laws of Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (recast),
according to the following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 60335-2-103:2003+A11:2009, EN 62233:2008
In addition, the product conforms to the following directive in accordance with the provisions applicable to "partly completed machinery":
• The models conform to Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery, and amending Directive
95/16/EC (recast)
• It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive 2006/42/EC and that the follow-
ing essential requirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to transmit to the national authorities any pertinent information on "partly completed machinery", in response to a motivated request,
without prejudice to its intellectual property rights.
• Should the "partly completed machinery" be commissioned in a European country with an official language different to the one used in this declaration, a translation
into that language accompanying this declaration must be provided by the importer.
• The "partly completed machinery" may not be commissioned until the final machinery into which it is to be incorporated has been declared to conform to the provi-
sions of Directive 2006/42/EC, where appropriate.
Furthermore, the parts of the product which are subject to the following standards comply with them: EN 13241-1:2003 + A1:2011, EN 12445:2000, EN 12453:2000,
EN 12978:2003 + A1:2009
Oderzo, 03 October 2016
30 – English
From 50 to 100m. This range can vary if there are obstacles or electromagnetic distur-
bances, and is affected by the position of the receiving aerial incorporated in the flasher
"Cycle" or "Complete cycle" (automatic closure) functionality
"Slow" or "fast" motors speed
Pause time during "complete cycle", selectable from 10, 20, 40, 80 seconds
Partial opening type selectable in 4 modes
Obstacle detection system sensitivity, 4 selectable levels
Obstacle detection system sensitivity, 4 selectable levels
Step-by-Step command functionality selectable in 4 modes
SbS input configuration on the control unit: SbS or pedestrian opening
FLASH output configuration: flashing light, courtesy light or gate open indicator
Motors discharge on closure selectable from 8 levels
Motors discharge on opening selectable from 8 levels
Self-recognition of devices connected to the ECSbus output
Recognition of the type of "STOP" device (NO or NC contact or 8.2 KΩ constant resistance)
Recognition of the manoeuvre length for each motor
Automation recognition with 1 or 2 motors
Revision: 0 Language: EN
NICE S.p.A.
Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV), Italy
NICE S.p.A.
Built-in 24 VDC electro-mechanical gearmotor for swinging gates
RIVA200M, CLB201
PR100, ECCO5BO, ECCO5WO, PH200, FL200
Ing. Roberto Griffa
(Chief Executive Officer)