emmeti Arcobaleno SXI Manuel D'installation Et D'utilisation page 37

4. ASSEMBLY INSTRUCTIONS
15) Fit the left and right side caps, inserting them in the aluminium pro-
files featured on the edges of the first and last collector and pushing
them towards the upper part of the collector (fig.15);
Fig. 15
16) Fit the upper left and right corner pieces and the extension(s), hooking
them onto the profile on the upper part of the collector (fig. 16);
Fig. 16
The upper corner pieces and the extension(s) should first be inserted in
the centre of one another (fig. 16a).
Fig. 16a
The two side corner pieces should overlap the upper ones (see fig. 14 b);
Secure the extension(s) to the structure of the roof with the plates pro-
vided (two for each extension). Hook the plates onto the extension
using rivets and then the plates onto the wooden strips using the
nails provided (fig. 17);
Strips
Lamelle
Fig. 17
18) Fit the butt strap between the two collectors, inserting it in the alumi-
nium profiles featured on the edge of the two collectors and pushing
it upwards (fig. 18).
Fig. 18
Secure the butt strap to the wooden frame of the collectors using the
screws provided (fig. 18a);
Fig. 18a
GB GB
37