4. ASSEMBLY INSTRUCTIONS
Fig. 8a
9) Repeat this step for the right-hand lower corner piece, making sure you
insert the two corner pieces into one another in the centre (fig. 9);
Fig. 9
10) Shape the lead sheet of the two corner pieces onto the roof so that
there are no interruptions between the sheet and the roofing (fig.
10);
Fig. 10
11) Make sure the two corner pieces rest against the aluminium profiles
of the collector side panels and then secure them to the wooden
frame using the nails provided (fig. 11 and 11a);
Fig. 11
Fig. 11a
12) Fit the left and right side corner pieces so that they are aligned with
the upper edge of the wooden collector profile (fig. 12);
Fig. 12
GB
GB
31