How To Pair The Midland Btx1 Pro S To More Than Two Units - Midland BTX1 PRO S Guide D'utilisation

How to use the Intercom with two units
To use the intercom feature, be sure that both units are turned on and cor-
rectly paired together.
Manual activation
Press the Middle button on one of the two units in "Intercom" mode. Com-
munication is enabled and remains active until you press again the middle but-
ton. The intercom need some seconds to activate, you will hear a beep tone
when the intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened
and will remain active for the time you are talking. If there is no conversation
the intercom will be closed after 40 seconds. If needed you can close the
intercom manually without waiting 40 seconds (just press the middle button).
If needed, you can enable/disable the VOX feature simply by pressing the
Backward button for 7 sec. A voice announcement will advise you when the
VOX is disabled. To turn the VOX on again, just press the same button and a
voice announcement will advise you that the VOX is now active/deactivated.
This setting is remembered also if you turn off the unit.
Attention: The Voice activation (VOX) can open the intercom communication
only to the unit that was paired with the Middle button. If you choose to use a
different button (Forward or Backward ), you will be able to active the intercom
only manually.
Adjusting the volume
Your Midland BTX1 PRO S uses AGC technology, which automatically adjusts
the listening volume in relation to background noises.
However, it is also possible to manually adjust the volume by means of the
"Volume +" and "Volume -"buttons. The volume setting is indipendent for
each audio source: intercom, stereo music, phone call, FM radio.
Attention: volume can be adjusted only when an audio connection is active.
22
Set up of the AGC system
To adjust the sensitivity of the AGC system you can use the "BT PRO UPDA-
TER" Pc Software or the smartphone "BT SET-APP" application. You can
choose different set up based on your motorbike type (naked, touring, sport)
or if you are riding as a passenger.
Attention: you can disable the AGC system pressing "Volume +" and "Volume -"
together for 3 sec.
How to pair the Midland BTX1 PRO S to more than two
units
One Midland BTX1 PRO S unit can be paired to maximum three other BT
units.
The Midland BTX1 PRO S has three main buttons (Forward, Middle and Rear).
To pair the devices, use the Central or Backward button.
The same button you will use to pair the unit will be also used to open/close the
intercom communication.
Universal Intercom
For example you can pair your passenger to the Middle button and other
motorbikers to the Backward and Forward button. Everytime you open the
"Intercom" connection to one person, the previous connection will be closed.
The connection is not a "chain", when two persons are talking it is not possible
to break (interrupt) the communication by one of the other units.
Rider 1
Rider 2
Passenger
www.midlandeurope.com