Charging Batteries - Midland BTX1 PRO S Guide D'utilisation

Masquer les pouces Voir aussi pour BTX1 PRO S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
Bluetooth devices:
› Mobile phone with MP3 player Stereo (A2DP protocol) and GPS navigator
› PMR446 transceivers (with built-in or external Bluetooth connection) for
group bike-to-bike communications.
Attention: Midland BTX1 PRO S is designed to withstand rain and water. Howe-
ver, if it is raining, always verify that the rubber cap protecting the recharging
sockets is fully fitted.

Charging batteries

Attention: Make sure that the unit is fully charged before use. Allow at least 3
hours for a full charge before using the unit for the first time.
Charge the unit by inserting the wall-charger into the charging socket (lift
the rubber cover to insert the plug). The red LED on the unit will start flashing
when charging begins.
Allow the headset to charge until the unit stops flashing or the blue LED turns
on.
When the charge is complete (the red LED is not flashing), release the he-
adset from the charger. Normally, after the first time, it takes 2 hours for a
full charge.
Attention: every time the micro USB recharging plug is inserted (or detached),
the device is automatically turned off. To use it while it is in charge, you should
turn the device on with the plug already inserted.
www.midlandeurope.com
Unit and fixing system description
BTX1 PRO S description
The BTX1 PRO S has five buttons on the front; the main three big buttons
are multi functions buttons: the Forward (on the left), the middle button and
the Backward (on the right), the two squared buttons are the Volume + and
Volume -.
Volume -
Forward
Middle
Description of the wired connections
On the bottom of the unit you can find the Charger jack that enables to re-
charge the unit using a standard microUSB power supply
Description of the audio kit
The audio system includes two HI-FI stereo speakers and two interchangeable
microphones, which are both supplied with a bracket and wired connection.
The mini connector on the microphone allows you to choose the microphone
that best suits the helmet you are using.
Volume +
LED
Backward
Charger plug
19

Publicité

Table des Matières
loading

Table des Matières