Setup And Firmware Update; Warranty; European Ce Notice Certification And Safety Approval Information - Midland BTX1 PRO S Guide D'utilisation

Masquer les pouces Voir aussi pour BTX1 PRO S:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
This procedure deletes all the paired Bluetooth devices stored in the memory
and it is therefore possible to start a new "clean" pairing session.
Back to factory setting
Sometimes you may find it necessary to go back to the factory setting, to
reset all the changes/setup already made and have a "clean" unit.
To perform this operation you must first enter the setup mode:
› Turn off the unit.
› Press and hold down the "Middle" button about 7 sec., until the Red light is
on permanently.
› Then simultaneously press and hold down all the three buttons "Forwar-
d"-"Middle"-"Backward" for 3 seconds. The Blue Light will be lit on for 1 sec
and than back to steady RED.
› Double click on the "Middle" button to exit the "Setup" mode and use the
Midland BTX1 PRO S
Adjusting/ Disabling the VOX feature (Intercom and telephone)
The Intercom feature can be enabled both manually and vocally (VOX). The
VOX activation is influenced by the helmet type, the background noise and
therefore by the speed.
For optimum results, it is possible to choose one of the following four mi-
crophone sensitivity levels: high, medium, low and very low. The default setting
of Midland BTX1 PRO S is "High". It is also possible to disable the VOX feature
in order to activate the Intercom and phone call answering features in manual
mode only.
These adjustements can be set through the program "BTPro Updater" suitable
for PC/MAC

Setup and Firmware update

It is possible to configure and update the firmware of your Midland BTX1
PRO S using the USB connection to your PC. On the Midland web site www.
midlandeurope.com in the Midland BTX1 PRO S page you can find the PC
software and the new firmware updates if available.
ATTENTION: DO NOT CONNNECT THE UNIT TO THE PC BEFORE YOU
DOWNLOAD AND INSTALL THE SOFTWARE
30
Use at your own risk
The use of the device will impair your ability to hear other sounds and others
around you.
Listening to music or speaking on a telephone may prevent you from hearing
others around you and distract you from riding safely. The use of such device
while riding may endanger you and others, and its use, in some areas, could
not be allowed.
Using this device at a high volume may result in permanent hearing loss.
If you experience ringing in your ear or any other hearing related pain, reduce
the volume or discontinue using this device. With continued use at high volu-
me, your ears may become accustomed to the sound level, which may result
in permanent damage to your hearing. Please use this device at a safe volume
level.

Warranty

The warranty lasts 24 months for the main device and 6 months for the acces-
sories (batteries, chargers, antennas, headsets and microphones). For further
information about the warranty, please visit www.midlandeurope.com.
European CE Notice Certification and Safety Approval
Information
This product is CE marked according to the RED Directive
free use in all the EU countries. Users are not permitted to make any changes
or modifications to the device. Modifications which are not expressly approved
by the producer invalidate the warranty card. For further information, please
go to our website: www.midlandeurope.com.
and is
2014/53/UE
www.midlandeurope.com

Publicité

Table des Matières
loading

Table des Matières