Optional Reception Settings - Sharp AJ-5030 Mode D'emploi

Optional Reception Settings

3
If the Color MFP doesn't respond, or
if the other party first talks to you and
then wants to send a fax, press the
START key on the Color MFP. (Press
your START key before the person
faxing presses their START key.)
Hang up.
Note: If you have set the Fax Signal Receive setting to NO, press the
START key on the Color MFP to begin reception.
Optional Reception Settings
Fax Signal Receive
The Color MFP will automatically begin reception if you hear a soft
fax tone after answering a call on an extension phone connected to the
Color MFP. If you use a computer fax modem to send documents on
the same line, you must turn this function off in order to prevent the
the Color MFP from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the
setting.
1
Press these keys:
The display will show:
FAX SIGNAL RX
1=YES, 2=NO
2
Press 1 to turn on the function, or 2 to
turn it off.
84
START
FUNCTION
4
YES
1
1 6
NO
or
2