Sharp AJ-5030 Mode D'emploi page 82

Broadcasting
3
Dial the receiving machines
(maximum of 10) using one or more
of the following methods:
• Press one or more Rapid Keys.
• Enter 2-digit Speed Dial numbers,
pressing the SPEED DIAL key
before each 2-digit number.
• Enter full fax numbers, pressing the
START key after each full number.
4
If the document is loaded in the auto
document feeder, press the START
key. Transmission begins.
If document is on the document glass,
press the BOOK FAX key. After the
document is scanned, press the
START key if you have no further
pages to send. If you have more pages
to scan, place the next page on the
document glass and then press the
BOOK FAX key again. After the last
page is scanned, press the START
key to begin transmission.
• A Transaction Report is
automatically printed out after
Broadcasting is completed. Check
the "Note" column of the report to
see if any of the locations are
marked "Busy" or have a
communication error code. If so,
send the document to those
locations again.
80
A
SPEED
DIAL
0
(Example)
From auto
document
feeder:
START
From BOOK FAX
document
glass:
1