Sharp AJ-5030 Mode D'emploi page 19

Connecting the telephone line cord
Insert one end of the line cord into the jack on the back of the machine
marked TEL. LINE. Insert the other end into a standard (RJ11C)
single-line wall telephone jack.
Dial mode: The fax machine is set for tone dialing. If you are on a
pulse dial line, you must set the fax machine for pulse dialing. Press
the keys on the operation panel as follows:
1
Press these keys:
The display will show:
DIAL MODE
1=TONE, 2=PULSE
2
Press 1 to select tone dialing, or 2 to
select pulse dialing.
3
Press the STOP key repeatedly to
return to the date and time display.
(Note: "CHECK BOTH CART."
appears if you have not yet installed
the print cartridges.)
TEL.
LINE
FUNCTION
4
TONE
Be sure to insert
the line into the
TEL. LINE jack.
Do not insert it into
the TEL. SET jack.
1
PULSE
or
2
1
STOP
Setup
3
17