Loading Printing Paper - Sharp AJ-5030 Mode D'emploi

Loading Printing Paper

Loading Printing Paper
The maximum number of sheets of paper you can load in the paper
tray depends on the weight and type of paper you are loading:
♦ Plain letter/A4 paper, 80 g/m
Maximum stack height: 10 mm
♦ Plain legal-size paper: 1 sheet
♦ Coated paper: 10 sheets
♦ Glossy paper/transparency/envelope: 1 sheet
Note: The above maximums are for normal temperature and humidity
conditions.
1
Insert a stack of paper into the paper tray, print side up.
• Align the stack of paper against the right paper guide.
The stack should not
be higher than this
line. If it is, remove
part of the stack.
20
2
: 100 sheets
Align the top edge of the stack
with the appropriate line (LTR
or A4). (Take care not to insert
the stack too far into the tray.)
A 4
LTR