Sharp AJ-5030 Mode D'emploi page 109

If desired, you can change the conditions under which a report is
printed out. Follow the steps below.
1
Press these keys:
The display will show:
TRANSACTION REP.
1:ALWAYS PRINT
2
Press a number from 1 to 5 to select
the condition for printing.
ALWAYS PRINT
1
ERR/MEM
2
3
SEND ONLY
4 NEVER PRINT
ERROR ONLY
5
3
Press the STOP key repeatedly to
return to the date and time display.
FUNCTION
4
The selections alternately
appear here.
A report will be printed after each
transmission, reception, or error.
A report will be printed after an error or
memory operation.
A report will be printed after each
transmission.
A report will never be printed.
A report will be printed only when an
error occurs.
Printing Lists
0
6
STOP
107