Sharp AJ-5030 Mode D'emploi page 11

PAPER TYPE key
4
Press this key to specify what type of paper you are using when
making a copy. Select PLAIN, COATED, GLOSSY, or
TRANSPARENCY. (The default setting is PLAIN.)
Arrow keys
5
FUNCTION key settings: Press the arrow keys after pressing the
FUNCTION key to scroll through the FUNCTION key settings.
ENLARGE/REDUCE: Press the arrow keys after making a selection
with the ENLARGE/REDUCE key to increase or decrease the
selected setting by 1% (hold down the arrow key for at least one
second to change the setting in increments of 5%).
Speaker and ringer volume: Press the left or right arrow keys to
adjust the speaker volume after pressing the SPEAKER key, or the
ringer volume at any other time.
Display
6
This displays messages and prompts to help you operate the Color
MFP.
RESOLUTION key
7
Press this key to select the resolution for copying or faxing.
POWER key
8
Press this key to switch between STAND-BY mode (for normal
operation) and SLEEP: RX ONLY mode (only fax reception can take
place). The selected mode appears in the display. (Note: The unit
power is turned on or off by plugging in or unplugging the machine.)
FUNCTION key
9
Press this key to select various special functions.
RECEPTION MODE key
10
Press this key to select the mode for receiving faxes (and voice calls if
a phone is connected to the Color MFP). The selections are AUTO,
MANUAL, and A.M.
REDIAL key
11
Press this key to automatically redial the last number dialed.
9