Sharp AJ-5030 Mode D'emploi page 113

3
Compare the diagonal line above the printed bars to the diagonal line
below the printed bars.
• Look for a break in the diagonal line above the bars. A break
indicates clogged nozzles.
Cyan, magenta,
yellow and black
purge lines (shown
here in black and
white) print when ink
is forced through the
print nozzles to
unclog them. If any
of these colors do
not print, you may
need to replace your
print cartridge.
4
If the bottom diagonal line still has breaks, repeat Steps 1 and 2 to run
the nozzle test again. Run the test a third time if necessary.
• If the print quality is satisfactory after running the nozzle test three
times, the nozzles are clean.
• If the print quality is still not satisfactory after running the test a
third time, continue with Step 5.
Breaks in the diagonal line at the top of
the page indicate clogged nozzles.
HEAD CLEANING PAGE
YOU CAN CHECK THE INK FLOW FOR EACH NOZZLE ON THE INK CARTRIDGES BY CHECKING THE PRINT SAMPLES BELOW. IF THE THIN
DIAGONAL, HORIZONTAL, COLOR LINES (AT THE BOTTOM OF THE PAGE) ARE BROKEN, THEN PRINT THUS HEAD CLEANING PAGE AGAIN.
Unbroken lines at the
bottom of the page indicate
the nozzles were cleaned.
Improving Print Quality
111