Sharp AJ-5030 Mode D'emploi page 24

Loading Printing Paper
Setting the paper size for faxing and copying
Your Color MFP has been preset to print on letter-size paper. If you
have loaded legal-size or A4 paper, you must change the paper size
setting. Follow the steps below.
Note: The following setting is only for faxing and copying. To select
the paper size for printing, use the Sharp AJ-5030 Properties on your
computer (to open the Properties, select Properties, Setup, or Printer
from the Print dialog box of your application).
1
Press the FUNCTION key, 5 and
then 1.
The display will show:
PAPER SIZE
1=LETTER, 2=LEGAL
2
Press 1 for LETTER, 2 for LEGAL,
or 3 for A4 size.
The display will briefly show your
selection, and then:
2: COPY CUT-OFF
PRESS START KEY
3
Press the STOP key repeatedly to
return to the date and time display.
(Note: "CHECK BOTH CART."
appears if you have not yet installed
the print cartridges.)
Note: If you loaded other than plain paper, you will need to change the paper
type setting. For copying, see page 50. For printing, select the paper type in
the Sharp AJ-5030 Properties on your computer.
22
FUNCTION
LETTER:
LEGAL:
A4:
STOP
1
5
1
2
3