EdilKamin NANCY Installation, Usage Et Maintenance page 36

Consists in:
Clean the stove internally and externally
Carefully clean the heat exchange tubes
Carefully clean and remove dirt from the combustion chamber and the relative compartment
Clean fans, verify mechanical and clamp loosening
Clean smo e channel (replace seals on smo e exhaust pipe)
Clean smo e duct (see wee ly cleaning)
Clean smo e extraction fan compartment, ow sensor and chec thermocouple.
Clean, inspect and scrape any residue from the ignition resistance compartment and if necessary, replace it
isually inspect the electrical wires, connections and power cable
Clean the pellet hopper and chec loosening of the feed screw - gear motor assembly
Replace the door seal
Functionality test: load the feed screw, ignite, let it run for
A
B
g.
MAINTENANCE
minutes and shutdown
ATTENTION !!!
g.
- 36
-