SCHOLTES BC 99D P 0 XA Mode D'emploi page 33

Safety devices
• the icon on the display, when lit, indicates that the oven door was
automatically locked as soon as the temperature reached a high value.
• if a malfunction occurs, the heating elements will be switched off.
• once the oven door has been locked, it will no longer be possible to modify
the duration and end of cycle settings.
Programming the automatic cleaning end time
1. Press the button until the
the DISPLAY begin to flash.
2. Turn the SET TIME knob towards " " and " " to adjust the time.
3. Press the button again, until the other numerical digits on the DISPLAY
begin to flash.
4. Turn the SET TIME knob towards " " and " " to adjust the minute value.
5. Press the button again to confirm.
6. Once the set time period has elapsed, the text END appears on the DISPLAY
and a buzzer sounds.
• For example: it is 9:00 and you have selected the Economy (ECO) FAST
CLEAN mode, which has a default time of 1 hour. The end of the cycle is
scheduled for 12:30, meaning it will begin automatically at 11:30.
If programming has been scheduled and confirmed, the
will be illuminated. The duration and the FAST CLEAN end time will appear
alternately on the DISPLAY.
At the end of the automatic cleaning cycle,
you will have to wait until the temperature inside the oven has cooled down
sufficiently before you can open the oven door. You will notice some white
dust deposits on the bottom and the sides of your oven; remove them with
a damp sponge once the oven has cooled down completely. If, on the other
hand, you wish to make use of the residual heat inside the oven, you do not
have to remove the dust deposits as they are completely harmless and will
not affect your food in any way.
Do not place
GB
or rest anything
on the open door
icon and the two numerical digits on
e buttons
NOTICE
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
33
GB