Publicité
Les langues disponibles
Les langues disponibles
We recommend only adding a few drops of oil at a time and waiting a few minutes to
see how it disperses, instead of saturating the pad initially. You can add more oil if
needed.
NOTE: Petroleum-based mentholated products are not recommended for use in the
tray, as over time this may deteriorate the strength of the tray. Instead use essential
oils such as eucalyptus and mint to create a similar fragrance.
NOTE: The aromatherapy feature only works when the humidifier is operating.
CARE AND MAINTENANCE
Cleaning your humidifier regularly helps eliminate odors and bacterial growth and helps
maintain the performance by reducing mineral build up on the transducer.
Do not leave water in the water tank or base when unit is not in use for more than a day
as mineral deposits and bacterial growth may accumulate very quickly.
WARNING: To reduce the risk of fire or shock hazard, always turn off and unplug unit
before draining the base with the transducer or accomplishing any cleaning or
maintenance procedures.
CAUTION: Always pour water out of tank
AWAY from air intake, to prevent damaging the unit.
See illustration.
CAUTION: Never immerse the base of this unit into water.
NOTE: Never use harsh cleaners or chemicals on this
humidifier. Do not use scouring agents on the outer body, as
this will scratch and mar the surface.
WEEKLY MAINTENANCE
1)
Turn off unit and unplug from outlet
2)
Rinse with fresh water and wipe out thoroughly. Do not allow water or cleaning
solution to get into control section or into the air intake.
3)
Rinse the water tank very thoroughly with clean water. Do not leave any
cleaning residue in tank. Wipe surfaces dry with soft cloth
WARNING: CHOKING HAZARD. The demineralization filter cartridge is a
small part. Do not allow children to play with parts from the humidifier.
4)
Empty water from tank and base then fill water tank about half full with warm
water and add two (2) tablespoons of white vinegar.
5)
Replace water tank cap tightly onto the water tank and swish solution vigorously
around in the tank, then let solution sit for 20 to 30 minutes.
6)
Rinse the water tank very thoroughly with clean water. Do not leave any
cleaning residue in tank. Wipe surfaces dry with soft cloth.
7)
To clean the base, first take a soft toothbrush or soft cloth and gently scrub the
metal surface of the oscillator. Do not scratch the oscillator with a hard object.
8)
Make similar white vinegar/water solution as above and pour carefully into water
basin portion of base. Let solution sit for 20 to 30 minutes. Pour out solution.
Rinse the water basin with fresh water and wipe out thoroughly. Do not allow
water or cleaning solution to get into control section.
9)
Put a little vinegar/water solution on soft clean cloth and wipe down outer
surface of unit.
10) Dry outside surface body with soft absorbent cloth.
7
Publicité
