Data Input - Lenze EPM-H510 Instructions De Mise En Service

Show/Hide Bookmarks
Operation
1 2 3
4 5 6
7 8 9
0
5.2

Data input

Data input and modification are described step-by-step using examples.
If you want to ...
A) select a menu/page.
•
Touch the corresponding button on the
touch pad.
change to the parameter level.
B)
•
Touch the parameter button on the
touch pad touch pad.
– The cursor is set onto the right digit. The cursor is set onto the right digit.
– In alphanumeric or dynamic text
fields the cursor is set onto the left fields the cursor is set onto the left
digit (see J) or I)).
C) enter a new numerical value.
1. Change to the parameter level (see B)).
2. Leave the cursor on the right digit.
3. Enter the value of the first digit.
– All other digits are set to zero. All other digits are set to zero.
4. Enter the value for the next digit.
– The digit entered will shift one place The digit entered will shift one place
to the left.
5. If necessary, enter a floating point.
TIP
Floating points can only be entered if the
field is defined as "Floating Point" (see
planning tool "HMI Designer").
6. Repeat step 4. until the value is entered.
7. If necessary, enter a sign.
8. Confirm the input.
– The cursor changes to the menu
level. level
64
Press keys...
...
0 9
...
0 9
.
+/-
EDBEPM-H510 DE/EN/FR 4.0
Example
-9876 -9876 -9876 -9876
0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3
. . . .
4 4 4 4 5 5 5 5 6 6 6 6
7 7 7 7 8 8 8 8 9 9 9 9
+/- +/- +/- +/-
-9876
0 1 2 3
.
4 5 6
+/- 7 8 9
0001 0001 0001 0001
0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3
. . . .
5 5 5 5
4 4 4 4 6 6 6 6
+/- +/- +/- +/- 7 7 7 7 8 8 8 8 9 9 9 9
0012 0012 0012 0012 0012
0 0 0 0 0 3 3 3 3 3
1 1 1 1 1 2 2 2 2 2
. . . . .
4 4 4 4 4 5 5 5 5 5 6 6 6 6 6
+/- +/- +/- +/- +/- 7 7 7 7 7 8 8 8 8 8 9 9 9 9 9
012. 012.
0 0 1 1 2 2 3 3
. .
4 4 5 5 6 6
+/- +/- 7 7 8 8 9 9
12.34 12.34 12.34
0 0 0 1 1 1 2 2 2 3 3 3
. . .
4 4 4 5 5 5 6 6 6
+/- +/- +/- 7 7 7 8 8 8 9 9 9
L
ESC ESC ESC ESC
ESC
ESC ESC ESC ESC
ESC ESC ESC ESC ESC
ESC ESC
ESC ESC ESC