Lenze EPM-H510 Instructions De Mise En Service page 70

Show/Hide Bookmarks
Operation
1 2 3
4 5 6
7 8 9
0
If you want to ...
select the warning register for a warning
C)
message. g
•
Th The warning register holds a history of i
all alarms. all alarms
• •
If "H" is indicated on the left, a warning If "H" is indicated on the left a warning
register has been selected. register has been selected.
•
Close the warning register and go back
to the warning message.
D) close a warning message.
$ $ $ $
70
Press keys ...
i t h ld hi t f
Note!
If the alarm register buffer is full, no more alarms can be saved.
!
Use the "HMI Designer" to define command for acknowledging alarms or
!
deleting them from the alarm register.
EDBEPM-H510 DE/EN/FR 4.0
Example
HIST
H H H H H H
0001 0001 0001 0001 0001 0001
H H H H H H
0032 0032 0032 0032 0032 0032
ESC
ESC
Tank pressure exceeds Tank pressure exceeds Tank pressure exceeds Tank pressure exceeds Tank pressure exceeds Tank pressure exceeds
safety limit safety limit safety limit safety limit safety limit safety limit
150.0 150.0 150.0 150.0 150.0 150.0
>13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a
<13-09-2000 10:48a <13-09-2000 10:48a <13-09-2000 10:48a <13-09-2000 10:48a <13-09-2000 10:48a <13-09-2000 10:48a ESC ESC ESC ESC ESC ESC
#13-09-2000 10:55a #13-09-2000 10:55a #13-09-2000 10:55a #13-09-2000 10:55a #13-09-2000 10:55a #13-09-2000 10:55a
Water level below Water level below Water level below Water level below Water level below Water level below
processor limit processor limit processor limit processor limit processor limit processor limit
10 10 10 10 10 10
>13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a >13-09-2000 10:45a
<13-09-2000 10:50a <13-09-2000 10:50a <13-09-2000 10:50a <13-09-2000 10:50a <13-09-2000 10:50a <13-09-2000 10:50a
#13-09-2000 10:53a #13-09-2000 10:53a #13-09-2000 10:53a #13-09-2000 10:53a #13-09-2000 10:53a #13-09-2000 10:53a
L