Maintenance; Battery Replacement - Lenze EPM-H510 Instructions De Mise En Service

Show/Hide Bookmarks
7
7.1
7.2
Fig. 7-1
L

Maintenance

Maintenance
The keypad is free of maintenance if all application conditions described in these Instructions
!
are observed.
(% 46)
Clean the keypad with denatured ethyl alcohol.
!
– If you use any other cleaning agents, please observe the information given in the table in
chapter 8.1.
(% 75)

Battery replacement

An integrated battery ensures that the recipe data, system time/data and contrast settings
!
remain stored when the keypad is disconnected from the voltage supply.
Battery data:
!
– Lithium battery 3 V, ∅19 mm (CR2032)
– Order number: EPZ-H600
# # # #
Stop!
Switch off the voltage supply before opening the housing!
!
The battery must be replaced within 30 minutes to avoid data loss.
!
Take off the housing cover
INPUT VOLTAGE: 18-32 VDC 15 W
FUSE 800 mA
3 V LITHIUM CELL TYPE CR2032
1 +24 VDC
2 0 VDC
0
3 N. C.
4
1
1 2 3 4 5
Take off the housing cover
1. Remove terminal strips '
&
2. Loosen screws and remove housing cover
LCD brightness adj.
0
MSP
EDBEPM-H510 DE/EN/FR 4.0
Maintenance
h510_008
73