ATE FB 5 ev Mode D'utilisation page 16

ATE FB 5ev
•
EN 61000-3-3/01.1995
•
DIN EN 50081-l/3.93
•
EN 55011 Tl 1/5.95
ATE TECHNICAL HOTLINE
Our experts will be happy to help you personally:
Phone: +49 1805 221242
Mo. – Fr. 9:00 a.m. –12:00 p.m. and 1:00 –5:00 p.m. (CET)
(0.14 €/min. from a German landline, max. 0.42 €/min. from
a German mobile phone)
E-mail: ate.hotline@continental-corporation.com
ERROR DESCRIPTION
Pump has no suction,
Pump is not building pressure
Bleeder device cannot
be switched on
Pump runs without pumping
brake fluid
14
CAUSE
Air in filler hose
Fluid container empty
Filler hose kinked
Pressure regulator turned off
Turn on pressure regulator all the
way
Power plug not plugged in
Fuse defective
Filter screen is stopped up
Operating pressure is set to 0 bar
CORRECTIVE ACTION:
Bleed filler hose
Fig. 5.3
Exchange container
Fig. 5.3
Remove kink
Exchange defective filler hose
03.9302-9003.3/740238
Set operating pressure
Fig. 5.9
Plug in power plug
Fig. 5.2
The fuse must be exchanged
Clean filter screen
Set operating pressure correctly
Fig. 5.9