Yamaha RS90NL Supplément Au Manuel De D'atelier page 130

5
È
1
SECONDARY SHAFT
SECONDARY SHAFT AND DRIVE CHAIN
HOUSING INSTALLATION
1. Install:
Installation steps:
• Install the secondary shaft.
7
• Install the drive chain housing 1.
• Tighten the bolts.
a
8
9
9
• Install the drive chain, drive sprocket and driven
2
• Tighten the nut 2.
3
• Install the drive chain housing cover 3.
4
È Properly install the rubber seal onto the drive chain
È
• Tighten the bolt 4.
6
• Tighten the bolts 5.
• Tighten the bolts 6.
• Install the spacer.
• Tighten the spacer set screw 7.
• Install the brake disc.
• Adjust the brake disc clearance.
56
• Secondary shaft
• Drive chain housing
Drive chain housing bolt:
43 Nm (4.3 m · kg, 31 ft · lb)
sprocket.
Secondary shaft nut:
90 Nm (9.0 m · kg, 65 ft · lb)
housing, making sure that these are no gaps.
Drive sprocket bolt:
48 Nm (4.8 m · kg, 35 ft · lb)
Drive chain housing cover bolt:
43 Nm (4.3 m · kg, 31 ft · lb)
Drive chain housing cover bolt:
24 Nm (2.4 m · kg, 17 ft · lb)
®
LOCTITE
Collar set screw:
6 Nm (0.6 m · kg, 4.3 ft · lb)
®
LOCTITE
POWR
TR