Publicité
Les langues disponibles
Les langues disponibles
Safety notices for the charger
m WARNING! Carefully read all safety notices and
instructions. Failure to comply with safety notices
and instructions can cause electric shock, fire and/
or severe injuries.
Store all safety notices and instructions for future
reference.
The term "power tool" used in the safety instructions
refers to mains-powered tools (with a mains cable)
and to battery-powered tools (without a mains cable).
WORK.AREA.SAFETY.
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
Iiquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep
children
and
bystanders
operating.a.power tool. Distractions can cause you
to lose contro
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating.a.power tool. Do
not use.a.power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention white operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct
•
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch does
•
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
•
•
•
•
•
away
while
•
CAREFUL HANDLING AND USE OF
BATTERY DEVICES
• Charge the batteries only in chargers that are
• In the power tools, use only the batteries de-
• Keep the unused battery away from paper clips,
• If used incorrectly, liquid may leak from the bat-
Service
• Have your power tool serviced by a.qualified
Safety notices for hedge trimmers
• Do not use the device in the rain.
• Always keep hands and fingers at a safe distance
• When working with this device, always wear
• Always use the device with both hands on the
Disconnect the plug from the power source
and/or the battery pack from the power tool-
before making any adjust -ments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentaIly.
Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect
the power tool's operation. If damaged, have
the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less Iikely to bind and are easier to control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
recommended by the manufacturer. Risk of fire
if a charger that is suitable for a specific type of
battery is used with other batteries
signed for the purpose. The use of other batteries
may result in injuries and risk of fire
coins, keys, nails, screws and other small metal
objects, which could cause bridging of the con-
tacts. A short circuit between the battery contacts
may cause burns or fire
tery. Avoid contact with this. In the event of ac-
cidental contact, rinse off with water. If the liquid
gets into eyes, seek medical assistance. Leaking
battery fluid may cause skin irritations or burns
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is
maintained.
from the cutting blade.
gloves, safety goggles, safety boots and long
trousers.
handles.
13 І 56
Publicité
