Display Information And Symbols - Roche CoaguChek XS Manuel D'utilisation

Display Information and Symbols

Display Information and Symbols
The meter performs an automatic display check when it is turned on. In
case you suspect the display or parts of it to be defective (e. g. if you have
dropped the meter), you must check by means of the display test if the
meter display works properly. If your display is not functioning properly,
do not perform further tests as results may be misread if a segment is
missing. Contact your local customer support and service centre in this
case.
18:88 28:88
pm
am
code
mem
888
QC
98
88 -88 - 88
error
set
%Q
Sec
INR
C
If the display check is too quick,
you can put it "on hold" by press-
ing and holding down the On/Off
button the next time you turn
the meter on. For as long as you
keep the button pressed, the dis-
play remains frozen.