Testing a Capillary Blood Sample
11:24
11:25
107
50
15
-05
-
15
15
-05
-
15
Sec
The hourglass symbol shows that
the test strip is warming up.
When the warming-up process is
complete, a further beep tone
(provided the beep tone is turned
on) indicates that you can now
apply blood.
The blood drop symbol and the
application area flash to indicate
that the meter is ready to perform
the test and is waiting for blood to
be applied.
At the same time a 180-second
countdown begins. You must
apply the drop of blood to the test
strip within this time, otherwise
you will receive an error message
(error, and "000" where the
result would normally be dis-
played).