Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning/disinfecting the test strip guide
Use the solutions recommended on page 71 for cleaning/disinfecting
the test strip guide. Apply the solutions for a contact time of > 1 minute
(refer to the corresponding product labeling) using lint-free cotton
swabs/buds.
Cleaning and Disinfecting the Meter
1 Remove the test strip guide
cover to clean it. (Use your
thumbnail to open the cover
of the test strip guide by
pressing its front edge
upward.) Move the cover
safely away from the meter.
2 Rinse the cover with warm
water or wipe it clean using
the solutions recommended
above. Let the test strip guide
cover dry for at least 10 min-
utes before re-attaching it.
73
Publicité
Chapitres
Table des Matières
