The Coaguchek Xs System; Introduction - Roche CoaguChek XS Manuel D'utilisation

Introduction

The CoaguChek XS System

The CoaguChek XS System (CoaguChek XS meter and CoaguChek XS PT
test strips) quantitatively determines prothrombin time (PT/Quick value/
INR) using capillary blood from a fingertip or untreated venous whole
blood. The CoaguChek XS System makes coagulation testing easy.
The CoaguChek XS meter guides you through the test step by step
using the symbols in the display. The code chip accompanying the test
strips contains lot-specific information about these test strips, including
calibration data that allow the correct results to be calculated, and the
expiry date for the test strips. You only need to insert the code chip, turn
the meter on, insert the test strip, and apply a blood sample. When the
CoaguChek XS meter is ready for a measurement, the result will be
displayed about 1 minute after application of the sample. After the
measurement, the meter automatically stores the result in memory.
If you have any questions about the CoaguChek XS meter, please contact
your local customer support and service centre. You will find contact
details on page 107.
Please note: Before you use the meter for the first time (i.e. after you
have first inserted the batteries), you must set the date and time correctly
to allow you to carry out measurements properly. Each time you replace
the batteries you need to check (and, if necessary adjust) the date and
time.
Introduction
9