Setting The Beep Tone - Roche CoaguChek XS Manuel D'utilisation

Setting the beep tone

After you have set the unit, you can choose whether you want the beep
tone "On" or "OFF". If you have selected "On," the meter will beep in the
following situations:
when it detects a test strip,
■
when pre-heating of the test strip is complete and you need to apply
■
a sample,
when it detects a sample,
■
when the result is displayed and
■
if an error occurs (three short beeps).
■
We recommend you leave the beep tone turned on.
0n
15 Press the M button to toggle
between "OFF" and "On"
("On" is the presetting).
set
16 Press the Set button to save
the chosen setting. The dis-
play automatically moves on
to the next setting option.
Meter Setup
35