Meter Setup
Setting up the meter (Set Mode)
All settings are entered with the Set button and the M button.
26
1 If the meter did not automati-
cally enter Set Mode when
you turned it on, press the
Set button (on the left side of
the meter) to put it in Set
Mode.
You can also press the
Set button to change to
Set Mode when the meter
is already turned on.
2 If the currently displayed set-
ting is correct (e.g. the date is
correct and you only wish to
change the time), you can
press the Set button to move
on to the next setting,
or