Roche CoaguChek XS Manuel D'utilisation page 20

Starting Up
11:23
20
15 -05 - 15
31 -12 - 00
set
6 On the next screen that
appears check that the date
and time are correctly set.
If these have not yet been set
or if they have been lost
(because the batteries were
removed from the meter for
more than one minute), your
CoaguChek XS meter now
automatically enters Set
Mode. After you have set the
date and time, the meter
enters Test Mode. If you wish
to enter any further settings,
turn to the chapter Setting up
the meter (Set Mode) starting
on page 26.
7 Turn the meter off again
when the settings are
correctly entered.