Charging Process; Ingerev City Wall, Ingerev City Ground; Ingerev City Duo - Ingeteam INGEREV CITY CW116 Manuel D'installation Et Usage

Operation

INGEREV CITY Wall, INGEREV CITY Ground

Status
Awaiting vehicle Continuous green
Awaiting charge
Charge Continuous blue
Reduced consumption
End of charge
Incident
Standby
End of charge
Card rejected

INGEREV CITY Duo

Status
Awaiting vehicle Continuous green
Awaiting charge
Charge Continuous blue
Reduced consumption
End of charge
Incident
Standby
End of charge
Card rejected
Select socket Current status lighting,

9.2. Charging process

9.2.1. INGEREV CITY Wall, INGEREV CITY Ground
The electrical supply connector must not be removed from the vehicle while the charging is being
carried out.
Starting the charge process
1. Make sure that the station's display shows the awaiting vehicle status with the electric vehicle figure.
ABA2020IQM01_A - Installation and Operation Manual
Lighting
The charging station is waiting for a vehicle to be connected in order to
proceed with charging.
Flashing yellow A user has identified a card using the reader and the charging station is
waiting for the user to connect their vehicle to the station.
A vehicle has been connected to the charging station.
Flashing blue The consumption is reduced.
Flashing yellow After a vehicle has been charged, a user has identified their card using the
reader and the charging station is waiting for the vehicle to be disconnected.
Continuous red The charging process is not being carried out correctly due to a problem.
None The charging station has been remotely shut down.
Steady white The charge has finished.
Steady white The SD card is not valid or has not been recognized.
Lighting
The charging socket is waiting for a vehicle to be connected in order to
proceed with charging.
Flashing yellow A user has identified a card using the reader and has selected the charging
socket and said socket is waiting for the user to connect their vehicle to the
station.
A vehicle has been connected to the charging station.
Flashing blue The consumption is reduced.
Flashing yellow After a vehicle has been charged, a user has identified their card using the
reader and the charging station is waiting for the vehicle to be disconnected.
Continuous red The charging process is not being carried out correctly due to a problem.
None The charging station has been remotely shut down.
Steady white The charge has finished.
Steady white The card is not valid or has not been properly recognized.
Once the card has been identified, it waits for the socket selection to start
flashing the charging process.
Description
Description
Ingeteam
EN
ES
FR
IT
49