Ingeteam INGEREV CITY CW116 Manuel D'installation Et Usage page 42

Ingeteam
3. Close the back access and lock it with the key.
When the charging station is powered both sockets are lit. After briefly verifying its status, the light will switch
to green and the display will show an electric vehicle and the current time. The station is ready and awaits
identification from the user in order to begin charging.
If the station detects a fault, the lights of the corresponding socket or both (if both are at fault) turn red and
indicates the type of incident on the display "9. Operation").
42
Three phase charging station.
B
A
Installing and connecting the unit
R, S, T: Phases R, S, T:
N: Neutral
PE: Ground
ABA2020IQM01_A - Installation and Operation Manual
C