Setting Date And Time; Golden Rules For Blood Pressure Measurement - Hartmann TENSOVAL Duo Control Mode D'emploi

3.2 Setting date and time

When you insert batteries for the
first time or change the batteries,
the device automatically switches
to the date / time function. You can
also reset the date and time at any
point by pressing down the START
button for 5 seconds while the
device is switched off.
When first used, the display shows
the number "31" for the day and
"12" for the month. The date set is
thus the 31st of December.
You must correctly set the
date / time before using the
device for the first time, so that all
memory and evaluation functions
function correctly.
DATE
display flashes. Press the
(–) buttons to change the day
displayed. For example, press
twice to set the date to the 29th of
December. Store the current day by
pressing the START / STOP button.
DATE
displays the month. You can set the
month also by pressing the
(–) button and store it by press-
ing the START / STOP button.
The number on
the left (date
indication) in the
(+) or
(–)
Now the number
on the right
flashes, which
(+) or
YEAR
change the year displayed as
mentioned above and store it by
pressing the START / STOP button.
TIME
left in the display flashes, indicat-
ing 12:00. Once the desired
number of hours has been set,
store it by pressing the START /
STOP button.
TIME
can change the minutes display
and store it by pressing the START /
STOP button.
3.3 10 golden rules for blood
pressure measurement
5 min
pressure by an average of approx.
6 mmHg systolic and 5 mmHg
diastolic.
128
Now the year
2011 is dis-
played. You can
Then you may set
the time. The
number on the
Now the number
on the right
flashes. Here you
1. Rest for approx.
5 minutes before
measurement.
Even deskwork
increases blood