Fitting Outer Frame - Dovre 2020 Installation Et Mode D'emploi

D Insulation material (minimum 5 cm)
E Fireproof wall
F Combustible wall
G Ventilation space (minimum 15 mm)
H Fireproof ceiling
I Combustible ceiling
J Convection air opening
K Insulation (optional)
L Fireproof base
M Combustible base
N Opening to prevent pressure build-up
O Connection pipe
P Convection air to another area

Fitting outer frame

The appliance can be supplied with a three- or four-
sided outer frame. An optional decorative frame can
also be supplied and that is fitted to the outer frame.
1. Fit the outer frame by fitting the sides together
with two screws; see next figure.
2. Fit the decorative frame by joining the sides of the
frame with a connecting element and fastening it
with the two screws (A) of the connecting ele-
ment; see next figure.
3. Centre the decorative frame on the outer frame;
see next figure.
Subject to change because of technical improvements
4. Put three supporting plates on each side between
the decorative and the outer frame; see next fig-
ure.
5. Attach the (assembled) frame to the appliance by
sliding the tabs on the vertical sides of the frame
between the appliance and the clamping plates;
see next figure.
15