Haverland COMPACT Manuel D'installation Et Utilisation page 47

INSTALLATION
7
Screw the two brackets (A) (or one support, depending on model) to the rear
part of the heater with the four screws (E) (or two screws, depending on model).
Note: The two brackets (A) are screwed to the holes located on the lower rear
part, at both ends.
8
Hang the radiator on the two hooks (C) on the wall.
Ensure that the radiator is correctly secured on both hooks.
Hanger
Hook
A
E
C
EN
Fig. 8
Fig. 9
COMPACT 47
EN