Sony RM-VLZ620 Mode D'emploi page 29

1
Press and hold SET for more
than 3 seconds.
While keeping SET held
down, press , then release
both buttons.
The SET indicator
lights up.
2
Enter  - 8 - 1.
SET/SET
indicator
Device
Select
buttons
3
Press a SYSTEM CONTROL
, 8, 1
4
Program a consecutive
SYSTEM
CONTROL
buttons
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
button or Device Select
button you want to
program.
procedure.
With this example, press the
buttons in sequence as below*:
DVD
* The procedure may differ depending
on your device. Program the correct
procedure for your device.
VIDEO1
2
US