Controlling Devices; Controlling Sony Devices With The Rm-Vlz620 - Sony RM-VLZ620 Mode D'emploi

Controlling Devices

Controlling Sony
Devices with the
RM-VLZ620
The RM-VLZ620 is preset at the
factory to operate Sony brand A/V
devices set to any of the Device
Select buttons (see the table below).
Device Preset
Select device
button
TV Sony TV
CBL (SAT) Cable set top box
(non-Sony)
DVR (PVR) Sony digital video
recorder
DVD Sony DVD player 11033
BD Sony Blu-ray Disc
player
VCR Sony VCR
CD Sony CD player
AMP Sony receiver
* The five-digit code is the preset
manufacturer's code.
Notes
 For button functions for each device, see
"Table of Preset Functions" (page 36).
 The remote control signals may be
different for some devices or functions. In
this case, teach the remote control
appropriate signals to the RM-VLZ620
(page 20).
 To control other Sony devices that are not
preset at the factory, set the manufacturer's
code for the device (page 12).
 Some devices that do not support infrared
signals will not work with the
RM-VLZ620.
10
US
Example: To operate a Sony
Factory
DVD player
setting*
02473 1
Press the desired Device
51376
Select button.
22676
11516
The selected Device Select button
60032
lights up when you press it, and
70000 turns off when you release it.
82586
2
Press any button to control
the device.
See "Table of Preset Functions"
(page 36) for the functions of
buttons for each device.
Note
If the device does not automatically turn on,
press POWER to turn it on.
Device
Select
buttons