Jacuzzi J-400 Manuel D'installation Et Utilisation Et Entretien page 53

Programming the ProClarity Depth Filter Timer
A programmable filter timer can be set to remind you when to
replace the ProClarity Depth Filter. Tap
enter the Programming Menu.
ProClarity Depth
40 days left
add
50
days
From the "Water Care" Menu you can to set the "ProClarity
Depth" timer.
Tap or to change the days in 10-day increments. The
range is from 0 to 90 days.
Tap to confirm and save your changes.
When the timer expires, a message will appear on the control
panel display. Follow the previous instructions to reset the ti-
mer. The filter must be replaced. Refer to section "Cleaning the
Filter Cartridges" for filter location. If you tap "snooze" the mes-
sage will clear but the error icon (
minder screen will reappear in 10 days.
Tap to return to the "Water Care" Menu. Tap again to re-
turn to the Settings Menu.
Optional Wi-Fi Setup
From the Settings Menu, tap
Menu tab in Orange. Tap
gramming options. Make sure you have downloaded the Wi-Fi
App for this setup.
SETTINGS
Water Care
Wi-Fi
Lock
You need to follow the instructions from the App in order to
connect the Wi-Fi.
While the system attempts to connect you will see the, "Spa Wi-
Fi Setup in-progress". When the connection is done the display
will read, "Spa Wi-Fi Setup Successfully Connected".
WiFi Connect
Spa Wi-Fi Setup
Successfully Connected
Reset?
If the Wi-Fi connection setting should need to be updated or
connected to new router, follow the steps below.
From the "Settings" menu, tap
menu.
Tap . The display will change to "Spa Wi-Fi Setup In-
Reset?
progress" and the reset button will be highlighted in Orange.
Tap again. This will clear the current data and allow
Reset?
the spa to connect to the need data. Reconfigure and setup
your spa by following the instructions from the app.
ProClarity Depth 50
Reminder
It's time to replace your
ProClarity Depth filter.
Contact your authorized
dealer for a new filter.
reset snooze
will display and the re-
)
or to highlight the "Wi-Fi".
to enter the pro-
Wi-Fi
Wi-Fi Connect
Spa Wi-Fi Setup
In-progress
Reset?
to enter the
Wi-Fi
Locking the Spa
From the "Settings" menu, tap
to
menu tab in Orange. Tap
gramming options. You can prevent users from changing cer-
tain features of the spa. When a lock feature is active, the lock i-
con ( ) will appear on the Main Menu. When you enter the
"Lock" menu, if one of the three settings is locked, it will be hi-
ghlighted orange.
Note: A default passcode can be used in case the original passco-
de is lost or forgotten. The code "0772" will unlock the locked set-
ting.
SETTINGS
Wi-Fi
Lock
Time & Date
Temp Lock:
Tap to lock. Tap
Use or to select a number from 0-9. Then move on to the
next number until a four digit code has been selected.
Tap to activate the locking feature.
The adjust temperature feature is disabled, but the spa will still
perform all scheduled tasks.
Tap to return to the "Settings" Menu.
Spa Lock:
Tap to lock. When this feature is activated both the spa and
temperature lock are highlighted Orange.
Tap (the first block) to select a number. Use
to select a number from 0-9. Then move on to the next number
until a four digit code has been selected.
Tap to activate the locking feature.
All activation and adjustment features are disabled but the spa
will still perform all scheduled tasks.
Tap to return to the "Settings" Menu.
Service Lock:
Tap to lock. When this feature is activated all the lock but-
tons highlighted Orange.
Tap (block) to select a number. Use
a number from 0-9. Then move on to the next number until a
four digit code has been selected.
Tap to activate the locking feature.
All spa functions are locked to allow for a temporary service
mode for filter cleaning.
Note: This mode has a time out of 2 hours. The spa should not be
left in this lock mode for an extended period. Especially in colder
climate or when freezing conditions exist.
53
or to highlight the "Lock"
to enter the pro-
Lock
Lock
Lock
(the first block) to select a number.
or
or
to select