Simplified Cook Cycle Instructions; To Cook In Two-Sided Mode - Garland XG24 Installation Et Fonctionnement

Table des Matières

Publicité

OPERATION

Simplified Cook Cycle Instructions:

1. Press button to turn on mainpower to grill.
1
2. Press
to turn zone power on.
Press button to turn on main
power to grill.
3
Press button to turn on main
power to grill.
Press
button to turn zone power on.
3. Load product on grill surface and select the
corresponding product key.
2
Place item on grill surface and
select item number for that item to
be cooked.
Press
button to turn zone power on.
Place item on grill surface and
Press both green and black buttons
4. Press both green and black buttons to lower clam and
select item number for that item to
to lower clam and begin cooking
begin cooking product.
be cooked.
product.
4
5
NOTE: To avoid damage to controller use knuckle or flat part of finger
to press buttons. Do NOT use finger nails, tongs or spatulas
Press both green and black buttons
to lower clam and begin cooking
product.
Page 12
NOTE: To avoid damage to controller use knuckle or flat part of finger
Place item on grill surface and
select item number for that item to
continued
be cooked.
Clam Grill Operating Instructions
Clam Grill Operating Instructions
2
NOTE: To avoid damage to controller use knuckle or flat part of finger
4
5
Press green button to cancel any
time during cook cycle.
Press green button to cancel any
time during cook cycle.
5. Press green button to cancel any time during cook cycle.
5
2

To Cook in Two-Sided Mode:

Press green button to cancel any
time during cook cycle.
1. To start a cook cycle select a product recipe by using the
product keys (1 through 9) or by using the UP/DOWN
keys
or
Press
button to turn zone power on.
The display alternately blinks the recipe and the word
to press buttons. Do NOT use finger nails, tongs or spatulas
SELECTED 2 times then the recipe displays continuously.
4
2. The controller regulates the platen and grill temperatures
to the set temperatures of the product selected and
reads "TOO COOL" or "TOO HOT" with "MENU ITEM", until
the grill attains the set temperature range for the item.
NOTE: If the display reads either "TOO COOL" or "TOO HOT"
the upper platen will not lower and initiate a cooking
Press
button to turn zone power on.
sequence.
3
After loading the product onto the grill, press the green
CANCEL/RAISE PLATEN BUTTON and BLACK button
simultaneously. A cook cycle starts and the upper platen
Press both green and black buttons
lowers if the product selected is clamshell recipe.
to lower clam and begin cooking
product.
4 To cancel a cook cycle at anytime press the green
CANCEL/RAISE PLATEN BUTTON and the upper platen
will rise if the product recipe selected is clamshell recipe.
5. During a cook cycle, the display shows the product recipe
name in the first line and the remaining cook time count
down in the second line.
Press both green and black buttons
6 When the cook timer reaches one, (1), second remaining
to lower clam and begin cooking
a pre-time-out alarm sounds alerting the operator.
product.
7
When the cooking time has been completed the platen
raises automatically. On the controller the "PRODUCT
NAME" and the word "REMOVE" will be displayed and an
audible alert will sound.
8. Pressing the green CANCEL/RAISE PLATEN BUTTON stops
the audible alert and the unit will revert back to IDLE
mode.
Press both green and black butto
to lower clam and begin cooking
product.
to select a product recipe.
Part # 4517124 Rev. 7 (08/17/11)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xg36

Table des Matières