Garland XG24 Installation Et Fonctionnement page 15

CLEANING AND MAINTENANCE
01
01
• Select Clean Mode
When Clean Mode has
been reached, the LED
indicators will turn GREEN.
05
• Remove the grease trough
from each side. Empty and
replace.
09
• Apply the grill cleaner to
outer edges of right and
left platens.
• DO NOT SCRUB
• Press green & black
buttons to lower the
center platen.
Part # 4517124 Rev. 7 (08/17/11)
02
• Wipe the Release
Material sheets with a
clean,sanitizer-soaked
grill cloth.
06
• Apply the grill cleaner
to front side of platens
starting from right platen
to left platen.
• DO NOT SCRUB.
10
• Apply grill cleaner to
inner edges of the right
and left platens, and
the edges of the center
platen.
• DO NOT SCRUB
• Press green button to
raise center platen..
continued
03
• Remove the locking clips,
bars, and release sheets.
Wash, rinse, and set aside
to dry.
• Set release sheets aside
on a flat surface.
07
• Apply the grill cleaner to
platen surfaces starting
from right platen to left
platen.
• DO NOT SCRUB
11
• Apply grill cleaner to
bottom grill surface.
• Spread the cleaner over
the entire lower grill
surface from front to back
using even strokes.
• DO NOT SCRUB
04
• Scrape the lower grill
surface with the scraper.
• Use the grill squeegee to
push residual grease into
trough.
• Wash and rinse the
squeegee and scraper.
08
• Apply the grill cleaner to
back side of platens from
right platen to left platen.
• DO NOT SCRUB
12
• Rinse platen surfaces with
a clean, sanitizer-soaked
grill cloth, starting from
right to left platens.
• Press green & black
buttons to lower the
center platen.
Page 15