Table des Matières
Publicité
PROGRAMMING
To Change Product Button, "Key" Assignment
1. Press
and hold for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANDBY" or menu assigned to
button 1 is displayed.
5. Use
and
to select any unused item from the Menu
Item.
6. Press
six, (6) to display "ASSIGN TO KEY (1-8 or NONE)"
- Make sure you have assigned desired values to time gap
and temperatures".
NOTE: If time is left with zero value, the key assignment will
not go into effect.(you will hear double beep when choosing
key in cooking mode)
7. Use
and
to change the key, (Product Button),
assignment, and replace any previous assignments to
that key.
8. Press
to save the changes.
9. Press
twice to exit.
To Change a Product Name:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
. "MENU ITEMS STANDBY" or menu assigned to
button 1 is displayed.
5. Use
and
to choose the desired Menu Item.
6. Press
seven, (7) times to display "PRODUCT NAME
(CHOSEN ITEM)" – Make sure you have assigned desired
values to time gap and temperatures)"
7. Use
and
to cycle through the available product
names until the desired name is achieved.
8. Press
to save the changes. You will automatically
return to "PROGRAMMING MODE MENU ITEMS".
9. Press
to exit.
System Info...
To View Recovery Time - Upper Platen:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
Part # 4517124 Rev. 7 (08/17/11)
continued
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
to view the upper recovery time. "RECOVERY
UPPER XXXX" is displayed.
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
To View Recovery Time - Grill:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
two, (2), times to view the grill recovery time.
"RECOVERY GRILL XXXX" is displayed.
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
To View the Garland Part Number:
1. Press and hold
for three, (3) seconds. "ENTER CODE" is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
"ENTER CODE **** " is displayed.
3. Press
to enter the Programming Mode.
"PROGRAMMING MODE MENU ITEMS" is displayed.
4. Press
one, (1) time to display "PROGRAMMING MODE
SYSTEM INFO. "
5. Press
three, (3), times to view the Garland Part Number
for the grill. "GARLAND PART # X...X" is displayed.
(number varies by grill).
6. Press
to return to "PROGRAMMING MODE SYSTEM
INFO".
7. Press
to exit.
Page 23
Publicité
Table des Matières
