Oxford HOTGRIPS EVO ADVENTURE EL420 Instructions De Montage Et D'utilisation page 9

with the operation of the switch.
• Conform to relevant European EMC directives.
• 12 Volt systems only (typically running voltage between 13.5 and 14.3volts).
• Current drain: Average 3.6 Amps per pair (50 Watts@14.0V).
• Fuse: 5 Amp mini-blade fuse.
• On some motorcycles that have older or small capacity batteries, the extra electrical
current demanded by the HotGrips can reduce the battery voltage levels and
replacing this by charging is recommended. Therefore, we always advise you to
connect the battery to a charging system such as one of the Oxford Oximiser chargers
when the bike is not in use.
instructions v.9 control - GB
9