Running Cue; Over Control; Fog Machine Operation - iSolution IL-2420 Manuel D'utilisation

3. Auto Mode
1. Press CHASE Button, use jog wheel #1 to select chase page.
2. Press AUTO/DEL Button to enter auto mode, the LED of
will be on.
3. Press number Button 1-20 to select the program you anticipant. You can
choose much more than one CHASE, and they will run on the train that you
select them.
4. Setting to CHASE RUN BY INSIDE TIME, then it will run as the FADE
TIME or FADE TIME of the step that you set when store the chase. Setting
to CHASE RUN BY OUTSIDE TIME , then it will run as the FADE TIME or
FADE TIME you set last time, you can also adjust by turn the joy wheel #3
or #4, or use TAP/INSERT Button to adjust the speed.
NOTE ： W hen you press TAP/INSERT to adjust the speed, adjusting the
running speed of the scene is based on the interval of pressing the Press
TAP /INSERT Button twice which no more than 10 minutes.

6.3 Running CUE

CUE can only run in manual mode.
1. Press CUE Button, use jog wheel #1 to select chase page.
2. Press number Button 1-20 to select the CUE you anticipant. You can
choose much more than one CUE and they will run on the train that you
select them.
NOTE: If a CUE includes several chases with different run time, we regard the run time of
AUTO/DEL
104-
the chase with the longest run time as the CUE's longest run time and the chase with short
run time will repeat automatically.

6.4 Over control

Using over control to change the effect specially, you can operate some units solely when
the CUE or CHASE or BANK running. There are two ways to operate:
A. When CUE or CHASE or BANK running, press OVERRIDE button, Then
press FIXTURE button, and use number button 1-20 to choose light, so you
can push the handspike to change the effect.
B. When CUE or CHASE or BANK running, press OVERRIDE button, then
use 1-20 button to open the effect that be programmed.

7. Fog Machine operation

7.1 Set up another 481CH DMX signal to control the fog machine(keep out the 482CH).
7.2 Fog Machine operation:
1. Connection: connect the fog machine with the DMX information.
2. Setting: Keep the power on , hold the FOG MACHINE button the press
PROGRAM button to enter the output menu,
3. Use #2 or #3 or #4 to setup duration set (1-100S) or interval set(0-200S)
or volume out(0-255).
4. Press ENTER/MAIN MENU button to store Press PROGRAM button to
exit
5. Control: The fog machine work as it's set in normal. Press FOG
MACHINE button to output maximal fog (set 481CH output to be 255).
105-