Modify Password; Enable Password; Erase All Memory - iSolution IL-2420 Manuel D'utilisation

6. Press ENTER/MAIN MENU Button to store, it will be finish after about 2
minutes.
7. Press ESC/CLEAR Button to back to the last menu, 2 times to back to
the main menu.

5.13 Modify Password

1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 13. Modify Passwords shown on the
monitor press ENTER/MAIN MENU button to enter.
3. Use Jog wheel #1 to select power on password or memory protect
password, Press ENTER/MAIN MENU Button to enter.
4. Use number Button 1-10 to input 6 digit old password(10 equal to number
0) ， i f the password is wrong , it will hint to input continually.
5. It will hint to input new 6 digit password after get exact password. You
have to input the same password twice, it will back to the last menu
automatically after change the password successfully.
6. Use Jog wheel #2 to select Power on password or memory protect
password.
7. Press ESC/CLEAR Button to back to the last menu, and again to the main
menu.
98-

5.14 Enable Password

1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 14. Enable password shown on the
monitor press ENTER/MAINMENU button to enter.
3. Use Jog wheel #1 to select use power password or use memory protect
password, press ENTER/MAIN MENU button to enter.
4. The LCD hint to input password, use number button 1-10 to input 6 digit
password.
5. Use Jog wheel #2 to select Enable or Disable.
6. Press ENTER/MAIN MENU Button to enter, all the LEDs blink for 3 times
indicate that you have set successfully.
7. Press ESC/CLEAR Button to back to the last menu.

5.15 Erase all memory

1. Enter Menu Mode.
2. Turn Jog wheel #1 up to when the 15. Erase all memory shown on the
monitor press ENTER/MAIN MENU button to enter.
3. The LCD hint to input 6 digit memory protect password. Input the exact
password, and Press ENTER/MAIN MENU Button to delete the memory
information. You have to input the password again when it's wrong.
99-